How to clean the lining of a fur coat?

The dirt on the fur coat from the wrong side spoils not only the appearance, but also the coat, which can greatly affect the fur. But how to clean the lining of a fur coat without spoiling such an expensive thing? If it is not possible to take it to dry cleaning, you can try to remove the pollution at home. What rules do you need to know? How to effectively remove stains on the lining fabric?

Fur Lining Cleaning Instructions

Happy owners of fur coats often do not notice minor contamination on the inside of the product. In the sock, they are invisible. Unfortunately, over time, there are more and more spots. Sooner or later, the moment comes when you realize that cleaning the lining is indispensable.

In order not to spoil an expensive product, use the following instructions.

• Prepare a special steamer (available at any sewing supplies store).
• Gently flush the lining material from the fur coat. Do not use a knife, blade, scissors, they can damage the product. If you are afraid, you can take the fur coat to the nearest atelier, where professionals will open the lining for a symbolic amount.
• Pour warm water into the basin. Its temperature should not be higher than 40 degrees, otherwise the lining may sit down (decrease in size).
• Dilute liquid detergent in water. You can use dry, but from it on some fabrics white stains may remain.
• Soak the product for 15 minutes and then gently rub. Rinse several times in clean, warm water.
• Dry the lining in a well-ventilated room. Do not use a hairdryer or hot batteries for this purpose. The product may sit down.
• Carefully stroke the dry lining. It is good if the iron supports the function of steam.
• Using a thin needle, sew the lining fabric in the same place (you can again use the services of the studio).

Tip

If you find damage on the lining of the fur coat, you must first repair them. In the case when the lining is hopelessly damaged, does not wash, you can completely replace it. Do not rush to throw out the old one, use it as a pattern.

Alternative way

If the lining on the fur coat is generally clean and you just need to remove a small stain, then you can use a different method. Such cleaning is usually faster than the steaming method.

So, how else can I clean the lining of a fur coat?

• Prepare a warm soapy solution, cotton cloth, durable coat hanger, sponge.
• Turn the fur coat inside out, hang it on your shoulders.
• Dip a sponge in soapy water and squeeze the excess liquid, gently rub the stains on the lining.
• Try to stretch the lining as far as possible so as not to wet the coat.
• When the stains disappear, walk a few times with a sponge with clean water.
• Blot the lining with a cotton cloth.
• Leave the fur coat on the shoulders to dry out.

Tip

It will be easier to wash the lining if you sew patchwork flaps of fabric on quickly soiled areas. For example, long coats often contaminate the hem. This method is good because you need to tear off not the entire lining, but only a small piece of fabric.

How to remove strong pollution?

It also happens that the spots on the lining of the fur coat with ordinary soapy water are not removed. What can be done in this case, what tool to use?

How to clean a white spotted lining

• Sweat. Sweat can be removed from the silk lining with a mixture of denatured and ammonia (1: 1).First, the solution must be applied to the place of contamination, and then after 10 minutes, wash the lining with a warm soapy solution.
• Stains from cosmetics. Mix a teaspoon of ammonia, the same amount of liquid detergent, 150 ml of warm water. Wipe the traces of cosmetics with the resulting solution, after 5 minutes, rinse the fabric with clean water.
• Fat. With stains of fat, an ordinary liquid dishwashing liquid does an excellent job. Just dissolve a few drops in a glass of warm water, and then apply the solution with a damp sponge to the places of contamination.
• Quick way. Most stains are easily removed with wet wipes, and they also effectively remove odors. Take a pack of thick, wet wipes and wipe the stains on the lining well.
• The old fashioned way. You can remove pollution from a thin silk lining with the grandmother's method. To do this, mix potato starch and water (cold) so that you get a batter. Apply it to the places of contamination, and then when the pulp dries, wash the lining with warm soapy water.

In winter, a fur coat is a favorite option for outerwear. In order for the product to last for a long time, it must be cleaned regularly as it becomes dirty. This is especially important at the end of the season. You can do the cleaning of a fur coat at home, or you can entrust the matter to dry cleaning professionals. The main thing is not to panic, even if the fur coat lining is very dirty, it can always be replaced with a new one.