the main · Tips ·

The second life of the bottle: why do we need a dispenser and how to get it out?

The dispenser on alcohol bottles does not allow reuse. Meanwhile, such containers are very attractive for storing home-made drinks, tinctures, and various oils. There is the easiest way to get the dispenser out of the bottle, so take your time to throw away a pretty container.

Bottle with dispenser

Where to begin

A dispenser on a bottle of vodka or whiskey allows you to conveniently pour drinks into glasses. Usually it is made of plastic. The item works like a valve: it’s easy to pour a drink out of a bottle without getting anything inside. This element protects buyers from fakes and facilitates the process of filling glasses.

Original bottles from Jack Daniels and other design containers are easy to adapt to homemade tinctures, as well as use for decoration purposes. Simply remove the plastic element from the neck.

Removing the dispenser from the bottle with a knife

It is important to be careful not to break the glass containers.

How to remove the dispenser: methods

The dispenser is plastic, which means it can be steamed.

How to remove a cork from a bottle, procedure:

  1. Pour water into a small saucepan and bring to a boil.
  2. Remove the aluminum trim from the neck.
  3. Dip the bottle down into the water.
  4. Hold for several minutes in hot water until the cork softens.
  5. Put on gloves so you don’t get burned! Gently pull the dispenser out of the neck.

Removing a dispenser from a bottle

If you can’t pull it out with your hands, use the blunt blade of the knife as a lever: pick up the edge of the dispenser and, leaning on the neck of the bottle, push it forward.

purity.bigbadmole.com/en/ magazine points out that the dispenser easily returns to its place after refilling the bottle. It will sit as tightly as before extraction. Only after a few procedures with boiling water can the material deteriorate.

 bottle dispenser

What to do if the dispenser is installed inside the neck and cannot be picked up with your fingers? And in this case, there is a way to get rid of it:

  1. Prepare a sturdy metal hook.
  2. Fill a heating pad with hot water and wrap a bottle neck in it.
  3. Hold the construction with a towel.
  4. After a few minutes, hook the dispenser and pull it out with force.

bottle dispenser parts

Some dispenser balls from imported bottles of tequila, absinthe, etc. cannot be picked up with either hands or crochet. In this case, just use a knife: cut the element inside the neck and remove it in parts. Reinstalling the dispenser will not be possible.

Particularly confused people have adapted to pour drinks even through a dispenser. If it is possible to remove the valve from a beautiful bottle, then it is better to do this: it will turn out faster and more accurately.

material author changes from
leave a comment

Cleaning

Wash

Stains