What to do so that the sheet and mattress do not slip? Simple life hacks

Moving bedding at night brings much more discomfort than you might think. This is a common cause of lack of sleep, poor rest, tight muscles, and poor mood in the morning and during the day. There are several simple ways to get rid of this problem: everyone can fix the sheets, as well as the mattress in the berth.

Why the sheet is constantly moving out

We will understand the cause of the problem. Why the sheet is slipping:

1. She's too big or too small.
2. It is not laid out correctly (fill the edges under the mattress).
3. The sheet material is incorrectly selected - thin, slippery, not suitable for the needs at this time of year.
4. Outdated / uncomfortable mattress design.
5. Restless sleep. If in the previous paragraphs the issue is resolved by replacing materials, then in this case additional fasteners will be needed.

Provide yourself with minimum comfort bedding. If the problem is still relevant, then use the methods described below.

Special holders

Special triple holders that are attached to the corners of the sheet allow you to easily increase the tension of the fabric, thereby saving it from slipping. The holders are made up of elastic bands and clips, in some ways they resemble suspenders for trousers. Their stretching is possible within a meter, which can be used on bulky mattresses.

DIY mounts

To keep the sheet on the mattress, use improvised means. Sew large buttons to the mattress, and elastic loops to the sheet. Or stitch a wide elastic band at the corners of the sheet so that they form triangles with the edges (as on children's mattress covers). Another option is Velcro, but after washing the bedding they quickly become unusable.

Clothespins such as crocodiles for curtains and office paper clips (large) are popular. They are placed around the perimeter of the mattress.

purity.bigbadmole.com/en/ magazine does not recommend using a pin for fastening: at night it can be unfastened and cause harm.

Cover sheet

Now European models of sheets with an elastic band around the edge have become very popular. They pull on the mattress like a cover and never slip. An ordinary sheet is easy to turn into a similar cover with your own hands.

How to do this, instruction:

1. Bend the sheet from all edges by 1-1.5 cm so that an elastic tape fits in the fold.
2. Sew the sheet around the perimeter, leaving a hole in order to pass the elastic.
3. Insert the gum through the hole, stretch it all over the sheet and fasten the edges with thread.

Tip
For convenience, fasten the tape on a pin, so it is much threaded.

The problem is in the mattress

If the mattress does not match the dimensions of the bed, then it should also be equipped with fixtures. Sew loops on the mattress cover that will cling to the base of the sofa. Another express method is the use of Velcro.

A quiet sleep is simple: once you mess with bedding, the desired comfort will enter your life.