Is it possible to wash an acrylic bathtub with Sanox: we understand the issue

Modern materials for plumbing often require special treatment. Is it possible to wash an acrylic bathtub with Sanox, what cleaning products are considered safe? Consider all the rules for cleaning acrylic.

Features of acrylic bath

Acrylic is a popular polymer material for plumbing. Such bathtubs have both advantages and disadvantages. These are very aesthetic, easy to install, not massive and convenient plumbing items. But when there is a need for cleaning, acrylic becomes a problem for housewives who are accustomed to "scrubbing" with aggressive agents.

Important
Acrylic does not tolerate "radical measures", but if you regularly wipe it with a damp sponge, it will remain beautiful for many years.

Acrylic does not absorb dirt due to its reduced porosity - all impurities remain on the surface. Smoothness also provides a low degree of penetration into the structure of harmful microorganisms.

Disadvantages of acrylic:

1. Over time, yellow water appears from dirty water.
2. Short-term staining is possible.
3. To avoid limescale, you have to wipe the material dry after use.

How to wash with "Sanoks": instructions

Sanox is a popular and inexpensive cleaning agent with the effect of whitening and disinfection. Sold in the form of a spray, gel and foam. All of them are acceptable for use on an acrylic bath.

Cleaning Instruction:

1. Apply Sanox Gel to a soft cloth or sponge. Spray at a distance of 10 cm.
2. Treat the entire surface and leave the product for 10 minutes. Additionally, wipe everything with a sponge without any extra effort.
3. Rinse Sanox thoroughly with warm water.

Advice from purity.bigbadmole.com/en/: Do not use hard, metal sponges or brushes. They damage the structure of acrylic.

What else can wash the bath? Ordinary soap will do: rub a soft sponge on it and walk over the surface. From folk remedies for acrylic, solutions of citric acid and bite are safe. As an alternative, use dishwashing gels, baby shampoos.

Tip
To add gloss to the acrylic, polish it in a circular motion with a wax-based polish.

Attention! What not to clean:

1. Chlorine-containing products.
2. Highly abrasive powders, both washing and cleaning, like Pemolux.
3. Ammonia based products.
4. Solvents: acetone, gasoline, etc.
5. Formaldehyde compounds.

Clean the acrylic bath with water or soap every day after use, and use Sanox once every 2 weeks. Treat plumbing with care, and it will delight for a long time with its cleanliness.