How to dissolve hair in a bathroom sink: 5 methods

Blockages in the bathroom can definitely not be called a pleasant sight: cleaning the drain in the bathroom from hair can be quite problematic due to accumulated water and the terrible smell of sewage. There are some quick cleanup tricks, but a resource purity.bigbadmole.com/en/ recommends not to drain the drain to clogging, but to resort to preventive measures.

Simple Drain Cleaning Methods

It is human hair that most often clogs the drain hole of a bathtub: it is ugly tangled and interferes with the passage of water. The bunch gradually collects other small garbage: pet hair, strings, pieces of soap, etc. If you do not eliminate such a blockage, an unpleasant odor will appear. Most often, the problem of hair congestion worries owners of a bathtub with a cross drain plug.

There are other reasons for frequent blockages, in addition to neglecting the cleaning of plumbing: this is an abundance of waste dumped and a malfunction in the sewer system itself. Try to control the amount of debris that enters the bath. Entrust repair and replacement of bathroom equipment to professionals.

You can remove the blockage from the hair in the plum bath mechanically and chemically. Let's start by cleaning with various items.

Plunger

Vantuz is the first assistant for plumbing blockages. This object with a rounded rubber nozzle pierces a blockage in the pipe through pressure.

How to clean the bath with a plunger:

1. Position the rubber nozzle so that it completely covers the drain hole.
2. Fill the bathtub with a little water so that it covers the rubber pad.
3. Lower the plunger handle down and tear abruptly to push through the blockage. Sometimes you have to work a few minutes. For convenience, choose plungers with a long handle.

Tip
You can use a plunger not only with an extreme degree of clogging of the drain. Pour water into the container periodically and clean it.

Cable

A plumbing cable is a savior in the most difficult situations. This is a long thin metal object with a convenient handle for rotation.

How to get rid of hair in a pipe with a cable:

1. Immerse the item in the pipe and gently push it as far as possible.
2. Turn the knob.
3. As soon as the resistance becomes noticeably weaker, move the cable forward and backward. When the clog breaks through, remove the cable and turn on the strong water pressure to finally push the garbage into the sewer.

Important
Be careful when cleaning the drain mechanically, especially if the pipes are plastic.

Remove manually

If there is not much hair, it is easy to get it with your hands. It is advisable to do this after each use of the bath. A more tenacious tool is a crochet hook or bent from hard wire with a fairly long handle. In any case, use protective rubber gloves to avoid touching the dirt.

From time to time it is worth opening the siphon itself and cleaning it from the inside, especially if an unpleasant smell penetrates into the room from the sewer.

How to remove the siphon and clean it:

1. To get started, place a piece of material directly under the siphon so that it absorbs moisture, and substitute the bucket. Protect the floor from dirt.
2. Slowly unscrew the lock nut, then remove the flask.
3. Water for a water lock from an opened siphon will immediately pour into a bucket, and part of the garbage will fall out there.
4. By hand or hook, check that a large lump of dirt is not stuck in the body of the siphon (reluctantly, for example, toothpicks standing across) are reluctant.
5. Wipe the siphon with a cleaning cloth. Try to clear it of plaque.
6. Reassemble the siphon in the reverse order; check for leaks by turning on the water.
7. The siphon is also recommended to be opened and cleaned for preventive purposes, without waiting for a clogged pipe. It is enough to do this once every 2-4 months, depending on the number of people in the family.

Sometimes removing the flask is not enough. If a lump of dirt (from rust, feces of pets and babies, etc.) has grown in the pipes, you have to disconnect the siphon from overflow and drain, clean the pipes with a hook or cable, wipe with a ruff or a napkin. After that, reassembling the structure, it is necessary to carry out dry cleaning. Such problems are especially common in older corrugated pipes older than 10 years.

A tricky way to quickly clean a pipe indiscriminately:

1. Unscrew the drain cap.
2. Cut a long strip of wide adhesive tape.
3. Dip the tape into the drain hole and slide it along the walls.
4. Hair and other debris will stick to the tape.
5. Repeat the process a couple of times to collect as much trash as possible.
6. Complete the procedure by flushing the pipe with water.

How to dissolve a blockage

Unlike solid objects (jewelry, toys and their parts, toothpicks or cotton buds, etc.), hair in a bathroom sink can be dissolved. Both industrial and some folk remedies are suitable for this.

Industrial facility

A lot of products are produced from blockages, but it is better to choose the one on which there is an indication "dissolves hair and wool." Also read the instructions: not all chemicals are suitable for use in a certain type of sewer pipe. For example, an aggressive Mole is not recommended for plastic.

Cleaners are liquid (gels) and dry (powders). The latter type is combined with a small amount of water, and usually it shows greater efficiency.

Tip
Never overexpose the product, pour it strictly for the time specified in the instructions, otherwise the pipes may be deformed, and you will have to replace them. Also, do not rush to rinse it off, let the chemistry act, and after rinsing, do not use the bathtub for some time, so that the product cleans the far sections of the pipe.

Do not forget to wear protective gloves and ventilate the bathroom after applying chemical products.

Soda and Vinegar

If you don’t have time to run to the hardware store for professional tools, use what is always at hand. Ordinary soda and vinegar do a great job with various impurities and blockages.

How to remove the blockage by the folk method:

1. If there is water in the bathroom that does not pass into the pipe, scoop it out.
2. Now pour about half a pack of baking soda into the drain.
3. After a couple of minutes, turn on the hot water tap. Soda will begin to hiss and go deeper into the pipe.
4. Instead of water, you can pour a glass of table vinegar. A violent reaction will begin, which will clear the blockage. After the hissing stops, turn on the hot water.

Tip
Manufacturers of chemical pipe cleaners recommend using them for preventive purposes once every 1-2 months.

Advice from purity.bigbadmole.com/en/: Think about why draining quickly clogs your hair. Check your health if your hair falls out in large quantities. Also, while washing your hair do not scratch your skin, do not tear out your hair, use mild shampoos and conditioners.

How to prevent hair from getting in

Prevent clogging hair drain - this is the main task of the hostess. The first measure of protection is the installation of a mesh on the drain hole, which will hold the hair and prevent it from falling into the pipe. A special device for trapping and removing hair, which is sold complete with siphons, will also help keep the bath clean.

Preventive measures include the already mentioned plunger and gels / powders for dissolving debris. But do not abuse the tools so as not to damage the pipes.

The cleanliness of the bath is in your hands. Do not ignore the first signs of blockage: it will be more comfortable for you to take water procedures in a clean bath with a quick drain of used water.