Choose a grease filter for hoods
Content:
A modern kitchen is inconceivable without a special air cleaner installed above the stove. A grease filter for hoods is an indispensable part in this design, because pollution reduces the service life of equipment and puts it out of order. Also, soot is dangerous, leading to a malfunction of the device.
A high-quality component must retard particles formed during the combustion process and protect the hood during the entire service life.
Types of grease filters
Specialists subdivide this part into two main types:
- disposable;
- reusable.
The first are made of cardboard, synthetic winterizer or other material and are marked with special colored signs. When they become invisible, the filter should be changed.
Reusable filters can be cleaned of grease and soot in order to be used again. For example, acrylic filters are washed once a month, but you do not need to squeeze them out - this can lead to cracks. Metal foil, stainless steel or aluminum are in the form of cassettes with small cells. It is convenient to use such filters, they serve for a long time and do not oxidize, because they are coated with a special composition. To clean, they need to be washed.
Manufacturers of grease filters for hoods
Grease filters with absorption function not only retain impurities on the surface, but also absorb them. The appliances resemble small rugs; most kitchen hoods have them in their design. Device from the manufacturer Krona consists of several layers of aluminum mesh, which protects the furniture and the air cleaner from dirt.
It is necessary to clean such a device once a month, otherwise the layer of fat will harden, and it will be difficult to bring the part into the appropriate form.
Fat filters for hoods from the company Cata consist of special aluminum, the number of metal layers is 5 pieces. For the air purifier, 2 filters are purchased, which are easily removed and cleaned. Thanks to them, fat does not get on the internal parts of the device and does not spoil it.
And also filters from the Italian company have proved themselves well. ElicaThey provide high quality air purification and prevent the failure of the hood.
Grease or carbon filter
Often, air purifiers are equipped with a single filter - a grease filter, however, for proper air purification, a coal one is also needed. Site author purity.bigbadmole.com/en/ figured out how the specified parts differ from each other. The fact is that the grease filter performs rough cleaning, retaining large particles of soot.
Such a filter absorbs about 95% of dirt and unpleasant odors in the kitchen.
But coal is intended for fine cleaning, it intensively absorbs gas impurities, harmful fumes and all kinds of odors. And if fatty parts can be intended for long-term use, then analogues based on activated carbon are always disposable and require frequent replacement.
The shape and degree of filling of carbon filters may vary. Today, devices from the company are popular Elikor made of charcoal-impregnated non-woven polyester. They perfectly absorb fat and odor residues and are considered inexpensive and of high quality.
Tip
When choosing a carbon filter from Elikor or another company, it is important to know that it will be effective only in combination with a grease trap.
They perfectly complement each other and extend the life of the hood.
Benefits of Grease Filters
Disposable components are convenient in that they do not require cleaning and are distinguished by an affordable price, and they can also be given the desired shape, depending on the type of air purifier. Reusable models need careful maintenance, however, they can be used for many years.
The following advantages of most fat filters can be distinguished:
- active absorption of soot and fat;
- ease of cleaning;
- durability.
The aluminum filter is considered to be the most functional; it not only delays the maximum of harmful fumes, but is also suitable for cleaning in a dishwasher. Such components are suitable for many models of modern range hoods, so they are recommended for home and industrial use.
How to clean the filter from contamination?
Reusable filters designed for reusable use are cleaned every month in order to maintain the efficiency of the device and for fire safety. A layer of dirt can be washed with a hard brush, and a little detergent should be added to hot water.
Tip
If you clean the device regularly, then such a measure will be enough.
If the used part is very dirty, the hood will not work effectively. Particles of grease and soot will be on the kitchen ceiling, walls and internal parts of the device, so it is so important to devote time to cleaning appliances.
- Put the part covered with a layer of dirt in a bucket of hot water and detergent (the mildest is laundry soap, dishwashing detergent is also suitable), leave it for soaking for several minutes. Next, remove the fat with a brush.
- For cleaning using a special tool for steel or enameled dishes - spray it on the filter, leave it for the time indicated on the label, then rinse with hot water, optionally using a stiff brush.
- Immerse the filter in a pan with hot soapy water and soda, rinse after a while. If you have not changed a part for a long time, then it must be boiled and left in a soap-soda solution for 2 hours.
- Sometimes only a radical method helps to clean a layer of dirt. The pipe cleaner cleans old dirt and restores the component to its original appearance. Close the hole in the stainless steel sink and draw water into it by adding a cleaning gel. When the fat layer has dissolved, remove the filter and wipe it.
- In addition, you can use granular concentrate to flush sewer pipes.
Important
Be sure to use rubber gloves when working with chemicals, as the product can even damage the metal filter for hoods.
With proper care, the grease filter will absorb a maximum of contaminants, and kitchen appliances will last you for many years. It is important to know that it is impossible to resort to a radical cleaning method more than 2 times, since chemicals damage the component.
Where to buy a grease filter for hoods
Parts for the air purifier are sold in kitchen equipment stores, and you can also purchase everything you need on websites dedicated to the implementation of cooking appliances. The cost of components varies greatly depending on the company, the service life and the materials from which they are made.
So, disposable parts for the hood can be purchased at a bargain price of 100 rubles, but aluminum options will cost much more, from 1200 rubles. There are modern models, the price of which is more than 4 thousand rubles.
The easiest way to choose a grease filter is to use the catalog of a store specializing in the distribution of such products, a wide range of products and various prices will help you make the right choice. But do not give preference to disposable models, it is much more profitable to purchase a reusable part.
An original filter from a trusted manufacturer will last you a long time and protect the hood from damage.