How to refill the printer and how to wash ink from hands, if it turned out not very neatly?

Refilling the printer at home has become a common procedure, not to mention those cases when this is part of your job responsibilities. It is very unpleasant when, at the end of the process, it is scary not only to go out the door, but even to glance at your hands. Where can one go out with scary black hands or even multi-colored bright spots? What diseases will others think of? An urgent need to rectify the situation.

Prevention - the key to healthy and clean hands

When ink from the printer gets on your skin, it is not just dirt, but also an active chemical. The first problem is to remember this in time and carefully protect your face, especially the eyes, from touching the hands.

Further problems multiply. The paint is designed to be absorbed into paper. Naturally, the pores of the skin are perceived as an excellent surface for the fulfillment of the mission, and it is very difficult to remove the paint from the hands without active agents.

However, everything is not so bad. Water-based inks can be washed off with plain water (although not always completely), but for inkjet printers, oil bases are used that cannot be washed off without the use of harsh chemicals.

What to do to avoid such a difficult situation? Elementary. It is enough to use thin rubber gloves that will help you work comfortably and at the same time stay with absolutely clean hands.

Wash water ink

Owners of HP or Cannon printers, as well as laser devices with water-based toners, are lucky. If there were no gloves on hand, they still have a chance - if there is running water nearby, the paint can be washed off. It is necessary to act very quickly, until the substance begins to dry. You can only wash it in a fresh state.

You can wash using ordinary soap, more active means are not needed. However, there is one caveat: in no case should you use warm water. The fact is that manufacturers of some brands provide for fixing toner on paper by exposure to high temperature. If you wash your hands with hot water, instead of washing off the paint, you can only fix it more firmly on the skin. If you made such a mistake, then you will have to follow the example of inkjet ink methods.

Wash inkjet ink

What is the difference between inkjet printers? Color fastness on paper. Unfortunately, the same applies to the skin on the hands. The creators of the paint made sure that it did not remain on the surface, but was absorbed inward from the top layer. Once in the skin of a person, the chemical does not notice the difference. It quickly penetrates through surface tissues, impregnates the upper layers. As a result, it is almost impossible to wash ink: only the surface of the skin is washed, and the refill continues to be visible through it.

When will the paint be washed off? For this, it is necessary that several layers of skin cells come off, in other words, after a few days. Speed ​​up the mono process only by frequent hand washing with soap.

It seems quite clear that gloves should be used when charging the printer. But no, some craftsmen instead adapted to use products that were completely unsuitable for washing hands. Among them are the leading means of cleaning the toilet and tile. The same “Domestos” is offered to pour on the spots, rub with a sponge, then rinse with soap and grease the skin with baby oil or cream.

Indeed, the remedy helps. But due to what? In fact, it corrodes the upper layer of the skin.Use such a barbaric method can only people with very healthy skin and as a one-time option, in the most extreme case. Allergies, a number of skin diseases, and other very unpleasant things can quickly develop.

In addition, other methods are offered on the net.

• Wipe the stain that has occurred after charging the printer with bleach. You can use the option for pools or in the form of bleach. It can be used only if there is a large amount of water and act very carefully to avoid contact with eyes. For eyesight, this can be fatal.
• You can apply bleach, which contains sodium hypochlorite. Actions are similar to the bleach option.
• Solvent for oil paint and pumice, the actions of which must be alternated.
• Use Vanish oxi action, thoroughly rub with a brush and wash off with soap.
• Alternate pumice and hydrogen peroxide.
• Take a big hand wash. During friction using powder, the skin layers are quickly erased, washed off, and even a useful thing can be done.

Be sure to use a nourishing hand cream after all of the above. You can children’s skin damage - because that’s what you are doing.

Tip

Epson inkjet inks and refills for printers are completely pointless to wash with gasoline, kerosene, alcohol and its solutions, acetone.

All these products do not always give a 100% result, but they do make ink spots less noticeable, more pale. However, is it worth so much torment for yourself and your skin for not fulfilling an elementary measure - thin rubber gloves dressed in your hands?